Avaya 9608 - Chapter 1: Introduction to 9608;9608 G and 9611 G SIP Deskphones; Deskphone Overview

To change a menu option in
this section, use the
Navigation Arrows to highlight
the feature.
5. Using your dial pad, edit the label. Example: Pressing the “2” on your dial pad displays the letter “A” and
pressing the “2” key again replaces the “A” with a “B,” pressing it again replaces the “B” with a “C” and
pressing it again replaces the “C” with a “2.” Pressing it again will redisplay the letter “A” and so on.
Pressing a different key moves the cursor one position to the right and displays the first alphabetic
character associated with that key. Repeat this key entry process to enter the rest of the label name.
6. Press Clear to clear all test fields and start over.
7. Press Save
You may revert back to the default button labels by pressing the HOME button, Options and Settings, Application
Settings, Restore Default Button Labels and the Default softkey to confirm.
Restore Default Button Labels
SCREEN AND SOUND
OPTIONS
Press the HOME button.
Press the Select softkey
under
Options and Settings.
Use the Navigation Arrows to
scroll to
Screen & Sound
Options
and press the Select
softkey.
To change a menu option in
this section, highlight the
feature and press the OK
button that corresponds to
that feature.
1. Press the Change softkey on the bottom of your display to change the brightness on your display screen.
Using the Right and Left Navigation Arrows, adjust the Brightness level.
Brightness
2. Press Save
1. Press the Change softkey on the bottom of your display to change the Contrast level on your display
screen. Using the Right and Left Navigation Arrows, adjust the Contrast level.
Contrast
2. Press Save
1. Press the OK button to see a list of the available ring patterns
Personalized Ringing
2. Two ring tone categories are available – Classic or Rich. Pressing the softkey below your chosen
category will reveal additional patterns
3. Using the down and up navigation arrows, select from a list of 8 Classic ring patterns or 6 Rich ring
patterns.
4. Press the OK button to hear a ring pattern again
5. Press Save to make it your ring pattern
1. Press Change or OK to turn the Button Click sounds “On” or “Off”
Button Clicks
2. Press Save
1. Press Change or OK to turn the Error Tones “On” or “Off”
Error Tones
2. Press Save
1. Press the
Phone Screen Width
Change
2. Press Save to retain your selection
softkey or the OK button to change the screen width from “Full” (each call appearance
or feature occupies the entire width of a line) or “Half” (each call appearance or feature occupies half the
width of a line, effectively splitting the screen in half)