Avaya 9650 - Page 7

9650 IP Telephone Getting Started Guide 7 16-601963 Issue 1 January 2007
. When the party answers, press Join to add the
e
Adding a person on hold to a conference call:
1. Start with an active call. If it is not highlighted, press the line button or Aux button or scroll to it.
3. l on hold that you want to conference and take it off hold by pressing Resume or by
pressing the line button, the Aux button, or OK.
4. Press Join to add the person to the conference call.
Dropping a person from a conference call:
1. Select the conference call and press the More softkey, then Details to see the parties on the call.
2. Select the person you want to drop.
3. Press Drop.
Features
Y use frequently to your Aux buttons – for example,
Send orward, and Send All Calls.
The scre entries (Speed Dial or Abbreviated Dial numbers) administered on the first
row of Aux buttons, and features administered on the second row of Aux buttons.
3
person to the existing call and establish th
conference connection.
2. Press Conf.
Select the cal
our administrator may assign specific features you
All Calls, Directory/Next/Make Call, or Call F
en below has autodial
Speed Dial buttons
Features
Forwarding Calls to another extension (Send All Calls Feature):
Using th :
ectory Aux button.
the dialpad keys to start spelling the last name of the person you want to call.
5. Select the Make Call Aux button when you see the name you want.
1. Press the Send Calls Aux button to turn forwarding on or off.
e Directory
1. Press the Dir
Feature to Call Someone
2. Use
3. Press each dialpad key one time for each corresponding letter.
For example, for “Hill,” press 4, 4, 5, 5.
4. Select the Next Aux button to view the next name alphabetically in the directory,
if necessary.