Issue 2 September 2005 25
Chapter 5: Prepare for Configuration
This chapter provides information on preparing the C360 for configuration, and discusses the
following topics:
● Establishing a Console Connection
● Assigning a C360 IP Stack Address
● Establishing a Telnet Connection
● Configuring the Switch
Establishing a Console Connection
This section describes the procedure for establishing switch access between a terminal and the
Avaya C360 switch over the serial port provided on the front panel of the C360 (RJ-45
connector labeled “Console”). For information on the console port pin assignments, refer to the
Avaya C360 Installation and Maintenance User Guide.
Figure 7: Avaya C360 Console Port
Figure notes:
1. Console port
1
To Next Page
Loading...
