Avaya C360 - Chapter 1: Before You Start; Gathering Information; Defining the Installation; Preparing Contacts You Might Need

Issue 2 September 2005 5
Chapter 1: Before you Start
Before you install your Avaya C360 Converged Stackable Switch, prepare all the information,
resources, and tools that you need during the installation process. Good preparation ensures a
smooth installation with the least amount of interruption.
!
WARNING:
!
WARNING: ONLY TRAINED AND QUALIFIED PERSONNEL SHOULD BE ALLOWED TO
INSTALL OR REPLACE THIS EQUIPMENT.
!
ADVERTENCIA:
!
ADVERTENCIA: SOLAMENTE PERSONAL CALIFICADO Y ENTRENADO DEBE INSTALAR O
REEMPLAZAR ESTE EQUIPO.
!
WARNING:
!
WARNING: EQUIPMENT MUST BE CONNECTED TO AN EARTHED MAINS
SOCKET-OUTLET.
!
ADVERTENCIA:
!
ADVERTENCIA: EL EQUIPO SE DEBE CONECTAR A UNA TOMA DE TIERRA PRINCIPAL.
Gathering Information
Defining the Installation
The C360 can be installed in several different configurations. Before you start the installation,
find out what configuration is needed for your site.
Preparing Contacts you might need
Ensure that you have the names and phone numbers of any people you might need to contact
at the installation site. This list might include the people responsible for:
● Network architecture