Configuring the Switch
Issue 2 September 2005 29
Tip:
Tip: Functions operate in their default settings unless configured otherwise.
802.1X port-control Auto
RADIUS server Disabled
Time server IP address 0.0.0.0
Timezone offset 0 hours
SNMPv1 communities:
Read-only
Read-write
Trap SNMP
Public
Public
Public
SNMP authentication trap Disabled
CLI timeout 15 Minutes
System logging Disabled
Allowed protocols:
SNMP
Telnet
HTTP
Telnet
ICMP redirect
SSH
Telnet client
Recovery password
Enabled
Enabled
Enabled
Enabled
Enabled
Disabled
Disabled
Enabled
User Name/Password root/root
Table 7: Default Switch Settings 2 of 2
Function Default Setting
2 of 2
To Next Page
Loading...
