Figure 5: PCI riser card (turned over)
Caution:
Risk of physical equipment damage
Remove the 1006r from the rack, and place it on a solid surface when replacing or adding
cards. The PCI riser assembly requires considerable force when inserting it into the
connector, and physical damage can result if the assembly is not properly aligned.
When you place the server on a solid surface such as a workbench, you have a better view of
the card alignment, and you can exert the necessary force when inserting the assembly into
the connector.
Important:
The PCI riser assembly must be fully seated to avoid server malfunction.
PCI riser assembly
Avaya CallPilot® 1006r Server Hardware Installation December 2010 15
To Next Page
Loading...
