Need help?Do you have a question about the Avaya CS 1000 and is the answer not in the manual?
General| Model | CS 1000 |
|---|---|
| Type | Communication Server |
| Capacity | Varies by configuration |
| Deployment | On-premise |
| Protocols Supported | SIP, H.323 |
| Scalability | Highly scalable, supports small to large enterprises |
| Redundancy | High availability configurations available |
| Maximum Stations | Varies by configuration, can support tens of thousands |
| Maximum IP Trunks | Varies by configuration |
| Maximum Users | Varies by configuration |
| Hardware Platform | Avaya Media Gateways and Servers |
| Networking | IP |
| Security Features | TLS/SRTP encryption |
| Operating System | Proprietary OS (typically based on Linux) |
Outlines the maximum capacity limits for SIP DECT systems regarding DAPs and handsets.
Specifies the essential requirements for deploying SIP DECT systems.
Provides guidance on planning an IP network suitable for supporting SIP DECT.
Lists the requirements for DAP placement to ensure optimal coverage.
Explains the site survey process to determine customer requirements and cell needs.
Provides an overview of the basics of SIP DECT system deployment.
Covers accessing site survey mode, deployment terms, and single-floor deployment.
Details procedures for defining cell boundaries and locating cell centers.
Guides on deploying SIP DECT across multiple floors and assessing floor layouts.
Addresses cell center spacing, reengineering for high traffic, and handset density.
Details on configuring firewalls to allow necessary SIP DECT services.
Explains the role and configuration of DHCP and TFTP servers for DAP provisioning.
Details on installing and managing the DAP Controller software.
Guides the basic configuration of SIP DECT with Communication Server 1000.
Instructions for configuring SIP DECT settings using the IP DECT Configurator tool.
Configuration of SIP domain, proxy IP, and authentication settings.
Procedures for configuring DECT-specific settings like PARI and codec usage.
Procedure to subscribe a DECT Handset to the system using DAP Manager.
Describes how to subscribe, disable, and manage DECT Handset subscriptions.
Instructions for updating handset firmware using the DECT Handset Configurator.
Procedures for loading updated firmware to the DAPs.
Steps for removing and replacing a DAP, with or without a new DAP available.
Tools and methods for synchronizing the DECT system and troubleshooting issues.
Procedure to export and import SIP DECT system configurations.
Steps to deactivate SIP DECT services and the DAP Controller.
Instructions for removing the DAP Controller software from the PC.
Guide for updating the DAP Controller software.
Provides settings to check for resolving common configuration problems.
Troubleshooting steps for inability to make or receive calls with DECT Handsets.
Procedure for entering monitor mode and testing the deployment handset.
Steps for installing the Outdoor Box with 4720 DAP and internal antennas.
Procedure for installing the 4720 DAP with external antennas.
Instructions for installing a C4710 DAP in an external housing.
Steps for installing a C4710E DAP with an external antenna.
Steps to upgrade SIP DECT system from SIPN to SIPL connection type.
Lets you subscribe a handset using a subscription file without PARK/PIN codes.
To Next Page
