Chapter 4: Software requirements
Navigation
• Call Server and SIP Line Gateway software on page 75
• DAP controller software on page 75
Call Server and SIP Line Gateway software
For information about the CS 1000E Call Server
, see Avaya Communication Server 1000E
Installation and Commissioning, NN43041-310. For more information about SIP Line Gateway
application installation, see Avaya SIP Line Fundamentals, NN43001-508.
DAP controller software
This section contains the steps to configure the SIP
DECT system. Before you can use SIP
DECT, you must install and configure the following software on the DAP controller PC:
• Microsoft Windows
You can install any of the following operating systems on the DAP controller or manager
PC.
- Windows 2003 or Windows 2003 Rel.2. Windows 2003 requires SP2.
- Windows XP Professional, SP2/SP3.
- Windows 7 (not the Home version!)
- Windows 2008
This document does not provide the steps you must follow to install the operating system.
For information about installing Windows, see the documentation that accompanied the
Windows software.
SIP DECT Fundamentals October 2012 75
To Next Page
Loading...
Need help?
General
