Avaya CS 1000 User Manual

Chapter 5: System configuration
T
raditional Digital Enhanced Cordless Telecommunications (DECT) is an application on the system that
allows digital wireless capabilities. With DECT, users can move around their work sites while answering
a call, making a call, continuing a call, or transferring a call.
Session Initiation Protocol (SIP) DECT on SIP Line provides the features of traditional DECT so that the
SIP DECT system can interact with Avaya Communication Server 1000 (Avaya CS 1000) through the SIP
Line gateway.
Prior to Communication Server 1000 Release 7.0, it was possible to connect SIP clients using the SIPN
connection method. Beginning in CS 1000 Release 7.0 the SIPN connection method is no longer
supported; however, you can migrate your SIPN connection to a SIPL connection. For more information
on the Upgrade procedure, see
Upgrade a SIPN connection to a SIPL connection on page 235
Navigation
This section contains the following navigation links to SIP
DECT configuration procedures:
•
Basic (simple) SIP DECT configuration with Communication Server 1000 SIP Line
Gateway on page 93
• Routed Head Quarter configuration on page
109
•
Multiple-site mobility network configuration on page
113
Basic (simple) SIP DECT configuration with Communication
Server 1000 SIP
Line Gateway
To configure the SIP DECT system, you must configure the following three components: the
Call Server, the SIP LINE Gateway, and the DAP manager. Use the DAP manager to configure
and monitor DAPs.
Use the following tools to configure a SIP DECT system:
• Element Manager or overlay program for Call Server
• IP DECT Configurator and DAP manager IP DECT, which are available as a part of the
DAP controller software package
SIP DECT Fundamentals October 2012 93

Avaya CS 1000 Specifications

General

Brand	Avaya
Model	CS 1000
Category	Server
Language	English