1. Install the wall mount set on the back of the cabinet.
You can configure the wall mount set for vertical or horizontal mounting; select the
mounting style before you install the mounting set on the cabinet.
2. Use the drilling jig to mark the positions where holes are needed on the wall, and
drill the holes.
You can configure the wall mount set for vertical or horizontal mounting; ensure that
you orient the jig to match the mounting orientation you selected in the previous
step.
3. Mount the cabinet to the wall.
Mounting the cabinet on a pole
Mount the cabinet on a pole.
1.
Mount the bracket to the back of the cabinet.
2. Connect the metal strip to the bracket using the bolt that is provided for this
purpose.
3. Place the cabinet against the pole.
4. Route the metal strip around the pole and connect the metal strip to the other side
of the bracket using the supplied bolt.
Mounting the cabinet on a pole
SIP DECT Fundamentals October 2012 233
To Next Page
Loading...
