Broadcast Groups
The Broadcast Groups feature allows you to add a DECT
Handset to a group for receiving
broadcast messages.
Important:
The Broadcast Groups feature is protected by a password. The default password is *632*.
Adding a new group
Follow this procedure to add a new group.
1. Select the Broadcast menu on the left and click the right mouse button on a free
field on the right.
2. Select New and enter group name and number
3. Click OK.
Important:
The Broadcast Group name is not saved on the MEM card. It can be saved only in the image
file.
Editing an existing group
Follow this procedure to edit an existing group.
1. Select the Broadcast menu on the left and click the right mouse button on the group
to edit.
2.
Select Edit and make the required changes.
3. Click OK.
Important:
The Broadcast Group name is not saved on the MEM card. It can be saved only in the image
file.
Deleting a group
Follow this procedure to delete a group.
1. select the Broadcast menu on the left and click the right mouse button on the group
to delete.
2.
Click Delete.
Importing groups from a file
Follow this procedure to import groups from a .csv file to the current image.
Broadcast Groups
SIP DECT Fundamentals October 2012 257
To Next Page
Loading...
Need help?
General
