Avaya CS 1000 User Manual

Chapter 3: Site planning and hardware
deployment
Navigation
• Components of SIP DECT systems on page 17
• Deployment requirements on page 19
• Types of SIP DECT configuration on page 28
• Site planning on page 33
• System deployment on page 40
Components of SIP DECT systems
This section contains information about the following topics.
• Call Server, Signaling Server, and SIP Line Gateway on page 17
• PC (DAP controller) on page 18
• DECT Access Points on page
18
Call Server, Signaling Server, and SIP Line Gateway
Before you install SIP
DECT, you must install and configure an Avaya Communication Server
1000 (Avaya CS 1000) system, as follows:
• Install Call Server and SIP Line Gateway.
For more information about SIP Line Gateway, see Avaya SIP Line Fundamentals,
NN43001-508.
The Avaya Communication Server 1000 CP PM Co-resident Call Server and Signaling Server
(CP PM Co-res CS and SS) can run the Call Server software, the Signaling Server software,
and the System Management software on the same hardware platform operating under the
RedHat Linux operating system.
SIP DECT Fundamentals October 2012 17

Avaya CS 1000 Specifications

General

Brand	Avaya
Model	CS 1000
Category	Server
Language	English