Testing the deployment handset
Figure 57: Handset display and keypad details
Entering the monitor mode
1.
Ensure that the basestation is installed and supplied with power.
2. To turn the handset on, press the Shift key and press the ON/OFF button.
DECT HANDSET appears on the handset display.
3. To select system mode, press the Shift key and press the Local key
.
SYSTEM appears on the handset display.
4. To select monitor mode, press the star (*) key.
MONITOR MODE appears on the handset display.
5. To select the monitor mode code, press the lock button.
CODE appears on the handset display.
Prepare the tool for deployment
SIP DECT Fundamentals October 2012 213
To Next Page
Loading...
