Chapter 4: Installing the server and
peripheral devices
In this chapter
• Installing the server on page 29
• Installing a High Availability system on page 30
• Inspecting the modem on page 31
• Connecting peripherals to the server on page 32
• Connecting the server to the Avaya server subnet (optional) on page 34
•
Installing the Avaya software feature dongle on page 35
Installing the server
Introduction
Before you install the 1006r server, ensure that the chosen location meets the requirements
identified on the "Site inspection checklist" provided in the Installation and Configuration Task
List (NN44200-306).
To install the server
Place the 1006r server in its chosen location. If you are installing the server in a rack cabinet,
follow the instructions provided with the slide rails.
Avaya CallPilot® 1006r Server Hardware Installation December 2010 29
To Next Page
Loading...
