4 5
Setting Up the Device Video Privacy
NOTE: if you are not using WiFi, make sure to connect a LAN / Ethernet cable.
CONTROLLING THE CU360: USING THE WEB
1. When the CU360 is connected to the TV and
your Network, the IP address (X.X.X.X) will be
displayed in the top left corner of the screen.
2. Using a device connected to the same
network, type http://[IP ADDRESS] into the
web browser.
3. Enter the default user name of Admin and
the password 1234.
4. A Configuration Wizard will be initiated (only
if the system has not yet been configured).
More details about system configuration can
be found in the CU360 User Guide, available at:
support.avaya.com
3. Plug in the power
adapter.
2. Plug the HDMI cable
into the TV and CU360.
1. Place the CU360
above your TV, and use
the hinge to secure it.
Use the rubber cap
to cover the camera
for privacy
Power SupplyUSB C USB A
EthernetHDMI
On / Off
Button
CONNECTING THE CU360 TO THE TV
To Next Page
Loading...
