Avaya Definity G3 / ProLogix - Supported Features; Configuring the PBX to Integrate; Mode Code Switch Administration

AVAYA DEFINITY G3 / ProLogicx Confidential
2
4.0 SUPPORTED FEATURES
• Call coverage to personal greeting
- busy
- ring-no-answer
- all calls
Supported integration features
• Message-Waiting Indicator
- lights
- audible message waiting (optional PBX feature)
• Automated Attendant
• Outcalling, Paging
• Multiple return-to-operator
• Direct Call
• Personal greeting of original-called party on a double-call forward
using call coverage
• Reply to message left by subscriber in internal telephone-answering
mode
• Call Sender
5.0 CONFIGURING THE PBX TO INTEGRATE
Five tasks must be completed when programming the PBX to integrate.
They are as follows:
Configuring the PBX to
integrate
• Enable Mode Code Integration.
• Configure each analog voice port.
• Configure the analog voice ports into a UCD group.
• Create call coverage path(s) that include the Intuity system access
number.
• Change subscriber's station programming to include the call
coverage path.
5.1 MODE CODE SWITCH ADMINISTRATION
Feature Administration to Enable Mode-Code Integration.
• Use the switch’s Customer Options form to enable mode code
integration.
Proceed as follows:
1. Enter the command: change system-parameters customer-
options and make sure the G3 Version (on the first line) is set to V6.
The information contained in this document is provided by AVAYA Inc. to serve as a guide. See the disclaimer on page 1