AVAYA DEFINITY G3 / ProLogicx Confidential
8
• Auto Attendant Setup for Day/Night Service
Administer the appropriate Business Schedule and Holiday
Schedule
Select “AUDIX Administration” menu
Enter “Change Auto-attendant-routing-routing table”
Administer parameters as follows:
UTO-ATTENDANT ROUTING TABL
Route Table Administration
Incoming Called Business Holiday Day
ight Alternate
Number Schedule Schedule Service Service Service
Mailbox Mailbox
Mailbox
??? Bus1 Hol1 ??? ???
NOTE: Day Service and Night Service Mailboxes will have to be
administered and an appropriate greeting must be recorded.
7.0 HARDWARE INSTALLATION
o Each IVC6 card supports six analog (tip/ring) connections. The voice
path between the Prologix and the INTUITY requires three pairs into
each RJ11 connection of the IVC6 card. The following shows an
example of how lines would be physically connected using a
IVP6 connector. Customers have the option to use other methods of
connectivity, provided they bring three pairs (6 wires) to each RJ11
on the back of the IVC6 card.
The information contained in this document is provided by AVAYA Inc. to serve as a guide. See the disclaimer on page 1
To Next Page
Loading...
Need help?
General
