Avaya ERS 2500 - Telnet Access Examples: Password Security Disabled

Avaya Inc. – External Distribution
11
avaya.com
The default user names can be changed using the following CLI command:
 ERS-Stackable(config)# username <user_name> <user_password> <switch|stack>
<ro|rw>.
3.4 Telnet Access Configuration Examples using Local
Users with Password Security disabled
3.4.1 Local Password Configuration - Password Security Disabled
For this configuration example, we will configure the following assuming we are using an
ERS5000 stack
 Change the default read-write user name from RW to user1
 Change the default read-only user name from RO to user2
 Disable Password Security
o This applies to secure version as Password Security is enabled by default on
SSH switch server
 For user1, use the password rwaccess
 For user2, use the password roaccess
ERS-STACKABLE: Step 1 – Enable Password Security
ERS-Stackable(config)# no password security
ERS-STACKABLE: Step 2 – Add new user names and passwords
ERS-Stackable(config)# username user1 rwaccess stack rw
ERS-Stackable(config)# username user1 rwaccess switch rw
ERS-Stackable(config)# username user2 roaccess stack ro
ERS-Stackable(config)# username user2 roaccess switch ro
ERS-STACKABLE: Step 3 – Enable telnet local authentication
ERS-Stackable(config)# cli password stack telnet local
ERS-Stackable(config)# cli password switch telnet local