Avaya ERS 2500 - SNMP System Name, Contact, and Location; Disable Snmpv1 and Snmpv2

Avaya Inc. – External Distribution
50
avaya.com
10.5 SNMP System Name, Contact, and Location
To add a switch system name, SNMP sysContact value, enter the following command:
 2526T-PWR(config)# snmp-server name 2526T-10
2526T-10(config)#
To add a SNMP server contact, SNMP sysContact value, enter the following command:
 2526T-PWR(config)# snmp-server contact <name>
To add a SNMP location, SNMP sysLocation value, enter the following command:
 2526T-PWR(config)# snmp-server location <string up to 255 chracters using “”
between string if spaces are used>
To change back to the default settings, enter the following commands:
 2526T-10(config)# default snmp-server location
 2526T-10(config)# default snmp-server contact
 2526T-10(config)# default snmp-server name
2526T-PWR(config)#
10.6 Disable SNMPv1 and SNMPv2
SNMPv1 and SNMPv2 access can be disabled by entering the following commands:
 ERS-Stackable(config)# no snmp-server community rw
 ERS-Stackable(config)# no snmp-server community ro