Avaya Inc. – External Distribution
IDE Step 3 – Add Users by going to Site Configuration -> Directories -> Internal Store ->
Internal Users and click on New
Enter the user name for read-only-access via User Name: and enter the password for this
user via Password and Confirm Password. Click on OK when done. If you wish, you can
also change the expiry date via Password Expires if you do not wish to use the default
setting of one year
Repeat again by clicking on New to add the read-write-access user. Enter the user name
for read-write-access via User Name: and enter the password for this user via Password
and Confirm Password. Click on OK when done. If you wish, you can also change the
expiry date via Password Expires if you do not wish to use the default setting of one year
To Next Page
Loading...
