Avaya G430 - Chapter 2: Requirements; V.150.1 Requirements

Chapter 2: Requirements
V.150.1 requirements
The requirements are as follows:
• G450 Branch Gateway.
- Hardware version 1.x or 2.x and greater
- Firmware 32.16 or higher
• At least one MP160 Media Processor Module installed on the G450 main board. See
Adding and removing the MP160 on page 15 for instructions on installing the MP160.
• G430 Branch Gateway.
- Hardware version G430 v1 or v2 and greater
- Firmware 35.8 or higher
• At least one MP120 Media Processor Module installed on the G430 main board. See
Adding and removing the MP120 VoIP module on page 21 for instructions on installing
MP120.
•
Avaya Aura
®
Communication Manager 6.3.
Note:
For information about the service pack, see the Avaya Support website: http://
support.avaya.com/.
Configuring V.150.1 on Avaya G450 and G430 Branch Gateway May 2014 13