Avaya G430 - Page 37

SPRT Retransmissions
Use this field to assign the maximum number of data retransmissions to Transport Channel 1
(TC1) and Transport Channel 2 (TC2). You can assign a value from 1 to 32. The default value
is 3.
SPRT TC0 Payload Size
Use this field to assign the maximum payload size to SPRT Transport Channel 0. You can
enter a value from 140 to 256. The default value is 140 bytes.
Note:
Maximum SPRT payload sizes might vary across different gateways depending on the
firmware and the hardware version.
SPRT TC1 Payload Size
Use this field to assign the maximum payload size for SPRT Transport Channel 1. You can
enter a value between 132 to 256. The default value is 132 bytes.
Note:
Maximum SPRT payload sizes might vary across different gateways depending on the
firmware and the hardware versions.
SPRT TC1 Window Size
Use this field to assign the window size to SPRT Transport Channel 1. You can enter a value
from 32 to 96. The default value is 32 bytes.
SPRT TC2 Payload Size
Use this field to assign the maximum payload size to SPRT Transport Channel 2. You can
enter a value from 132 to 256. The default value is 132 bytes.
Note:
Maximum SPRT payload sizes might vary across different gateways depending on the
firmware and the hardware versions.
IP codec set
Configuring V.150.1 on Avaya G450 and G430 Branch Gateway May 2014 37