Avaya Hirschmann MACH1040 - CLI Configuration

Avaya Inc. – External Distribution
ERS 5000 Series with Hirschmann™ IE Switches TCG
15
avaya.com
June 2011
5.3 CLI configuration
The following configuration shows how to configure the ERS 5600 with the CLI:
1
Enter Interface Configuration mode and disable Spanning Tree on port 1/3:
5600(config)#interface FastEthernet 1/3
5600(config-if)#spanning-tree learning disable
2
Enable Spanning Tree on port 1/3:
5600(config-if)#spanning-tree learning normal
3
Disable Autonegotiation on port 1/3:
5600(config-if)#speed 100
5600(config-if)#duplex full
4
Enable Autonegotiation on port 1/3:
5600(config-if)#speed auto
5600(config-if)#duplex auto
5
Enable IGMPv1 on VLAN 1:
5600(config)#interface vlan 1
5600(config-if)#ip igmp
5600(config-if)#ip igmp snooping
5600(config-if)#ip igmp version 1
5600(config-if)#ip igmp mrouter 1/3
6
Enable IGMPv2 on VLAN 1:
5600(config-if)#ip igmp version 2