Avaya Hirschmann MACH1040 - GUI Configuration

Avaya Inc. – External Distribution
ERS 5000 Series with Hirschmann™ IE Switches TCG
25
avaya.com
June 2011
9
Enable IGMPv1 on VLAN 1:
5600(config)#interface vlan 1
5600(config-if)#ip igmp
5600(config-if)#ip igmp snooping
5600(config-if)#ip igmp version 1
5600(config-if)#ip igmp mrouter 1/45-48,2/1-4
10
Enable IGMPv2 on VLAN 2:
5600(config)#interface vlan 2
5600(config-if)#ip igmp version 2
6.4 GUI configuration
The following sections show how to configure the MACH1040 and the ERS 5600 with the GUI.
Note: This test uses four copper ports and four fiber ports.
The copper MLT ports are 1/45-1/48.
The fiber MLT ports are 2/1-2/4.
MLT 1 is the Copper MLT.
MLT 2 is the Fiber MLT.
Autonegotiation is always on the Fiber ports.