Avaya J169 - Page 238

Parameter name Default
value
Description
will be replaced by the phone's
serial number) or $MACADDR
(which will be replaced by the
phone's MAC address), but it can
contain other characters as well,
including spaces.
The value can contain eight
($MACADDR) to 255 characters.
MYCERTDN Null Specifies the part the SUBJECT of
an SCEP certificate request that is
common for all phones.
The value must begin with a / and
can include Organizational Unit,
Organization, Location, State and
Country.
The value can contain Zero to 255
ASCII characters.
Note:
/ must used as a separator
between components.
Commas do not work with
some servers
MYCERTKEYLEN 2048 Specifies the bit length of the public
and private keys generated for the
SCEP certificate request.
The value is a 4 ASCII numeric
digits. The phone supports only
value 2048.
MYCERTRENEW 90 Specifies the percentage of the
identity certificate's validity interval
after which renewal procedure is
initiated.
Valid values are 1 through 99.
MYCERTURL Null Specifies the URL of the SCEP
server for obtaining an identity
certificate.
The URL can be HTTP or HTTPS.
The valid values can range from
Zero to 255 ASCII characters.
MYCERTWAIT 1 Specifies the phone's behavior if
the SCEP server indicates that the
Table continues…
Appendix
December 2018 Installing and Administering Avaya J100 Series IP Phones 238
Comments on this document? infodev@avaya.com