Avaya J169 - Page 240

Parameter name Default
value
Description
OCSP_ENABLED 0 Specifies that OCSP is used to
check the revocation status of the
certificates. Value operation:
• 0: Disabled. Certificate revocation
checking is not performed.
• 1: Enabled. Certificate revocation
checking is performed.
OCSP_HASH_ALGORITHM 0 Specifies the hashing algorithm for
OCSP request.
Value operation:
• 0: SHA1 hash algorithm
• 1: SHA256 hash algorithm
OCSP_NONCE 1 Specifies whether a nonce is added
in OCSP requests and expected in
OCSP responses.
Value operation:
• 0: Not added to OCSP request.
• 1: Added to OCSP request.
OCSP_TRUSTCERTS Specifies a comma separated list of
OCSP trusted certificates that are
used as OCSP signing authority for
checking the revocation status of
the certificate. This applies to when
the OCSP responder is using a
different CA. Spaces are not
permitted in this parameter.
OCSP_URI Null Specifies the URI of an OCSP
responder. The URI can be an IP
address or hostname. Valid values
contain 0 to 255 ASCII characters,
zero or one URI.
OCSP_URI_PREF 1 Specifies the preferred URI for use
in an OCSP request when more
than one source is available. Value
operation:
• 1: Use the OCSP_URI and then
the OCSP field of the Authority
Information Access (AIA)
extension of the certificate.
Table continues…
Appendix
December 2018 Installing and Administering Avaya J100 Series IP Phones 240
Comments on this document? infodev@avaya.com