J169/J179 SIP Telephone
End User Reference Guide
a. Replace (to replace the contact with another)
b. Clear (to remove the contact from the Speed Dial list)
Alerting on Calls:
This feature will set the LED beacon to illuminate and notify you when there are incoming calls and messages. For an
incoming call, the LED will flash/blink. When there are new Voicemail messages the LED is lit continuously.
1. Press Main Menu> Settings>Phone
2. Scroll to Alerting on calls.
3. Press Change to enable or disable visual alerting.
4. Press Save.
Personalize ringing:
Use this procedure to set a ring tone for different uses.
1. Press Main menu.
2. Scroll to Settings>Audio>Personalize ringing.
3. Scroll to one of the following options that may be applicable to your phone:
• Primary, Team Key, Bridged CA, Call Pickup
• Press the Select or OK button
4. Scroll to the ringtone, and press Select.
5. (Optional) To play the ringtone, press Play.
6. Press Save
To Previous Page
Loading...
