Avaya Norstar M7310 - Page 19

Norstar Mode M7310 Phone User Guide Page 19
- Issue 4a (14 June 2012)IP Office Basic Edition
Call Handling: Speed Dialing
To Use an Auto Dial Button
1.
At dial tone or whenever you want to dial a number, press the programmed auto dial button.
2.
The stored number is dialed.
To Create an Auto Dial - Other Button
1.
At the phone press Feature *3. Program Ext: is displayed.
2.
Press the button that you want to edit or enter the button number to select the button. The current setting of the
button is displayed.
3.
To create an auto dial button to store an extension number press your first Intercom or Call Appearance button. For
a button to store any other type of number press your second Intercom or Call Appearance button.
4.
Enter the number for calls made using the button. An external number can include * and # and the following
special characters:
Function
Press to insert
Character
Description
Pause
HOLD
P
Inserts a 1.5 second pause.
Transfer
SPEAKER
R
Send a hook-switch flash signal.
Stop
CONFERENCE
S
Stop dialing.
5.
The current setting of the button will now be AD-I (auto dial intercom) or AD-O (auto dial other) followed by the
stored number.
· To finish, end the call or press the Release button.