Avaya one-X Application Notes

JC; Reviewed:
SPOC 3/9/2010
Solution & Interoperability Test Lab Application Notes
©2010 Avaya Inc. All Rights Reserved.
5 of 12
P210A-1XC
4.1. Configure Station for Avaya one-X Communicator
Use the add station n command, where n is an available extension in the dial-plan. To create a
station to be used by Avaya one-X Communicator, the following information should be
provided:
• Type: The IP Telephone type that will be emulated. In this compliance testing, the type
was set to 9640.
• Security Code: Password used by Avaya one-X Communicator to log in.
• Port: Set to X to administer the station without hardware.
• IP SoftPhone?: y
add station 60011 Page 1 of 5
STATION
Extension: 60011 Lock Messages? n BCC: 0
Type: 9640 Security Code: 12345 TN: 1
Port: X Coverage Path 1: 8 COR: 1
Name: 1XC User 1 Coverage Path 2: COS: 1
Hunt-to Station:
STATION OPTIONS
Time of Day Lock Table:
Loss Group: 19 Personalized Ringing Pattern: 1
Message Lamp Ext: 60011
Speakerphone: 2-way Mute Button Enabled? y
Display Language: english Button Modules: 0
Survivable GK Node Name:
Survivable COR: internal Media Complex Ext:
Survivable Trunk Dest? y IP SoftPhone? y
IP Video Softphone? n
Customizable Labels? y
4.2. Configure IP Codec Set
The following screen shows the codec set configuration that was used during the test. To
configure the codec set, use the change ip-codec-set n command, where n is the IP codec set
used by Avaya one-X Communicator. In this compliance testing, the G.722-64K and G.711 mu-
law codecs were used.
change ip-codec-set 1 Page 1 of 2
IP Codec Set
Codec Set: 1
Audio Silence Frames Packet
Codec Suppression Per Pkt Size(ms)
1: G.722-64K 2 20
2: G.711MU n 2 20
3:
4:
5:
6:
7:

Avaya one-X Specifications

General

Brand	Avaya
Model	one-X
Category	IP Phone
Language	English