Chapter 4: Making a call
If you are not on a call, simply dial the number you want to call. If your dialing option is set to
"editable" you can edit the number as you enter it, then call it using softkeys; see Making a call
using edit dialing on page 37 for information. Use the Phone screen to view and manage
calls. Press Phone to view the main Phone screen at any time. When the Phone screen is
displayed, press Phone to move to the top of the call appearance list.
1. Lift the handset, or press Speaker or Headset (if applicable) or a line button for an
available line.
2. Dial the number you want to call.
Making an emergency call
You do not have to be logged in to make an emergency call. If emergency calling was set up
by your system administrator, the Phone screen has an Emergency softkey to immediately
connect you with a preset emergency services number.
Important:
During telephone failover (switching between telephone system servers during a system
failure) the Emergency softkey may not be available until your telephone is connected with
an alternate server, usually within several seconds.
1. Press the Emerg. softkey. If you do not see an Emerg. softkey, pick up the handset
or press the Phone button, then press the Emerg. softkey.
2. If the telephone prompts "Do you want to make an emergency call?" press the Yes
softkey.
Some phone systems will call back to confirm the emergency status. The phone
automatically answers the incoming call on the Speaker and displays “Emergency
Call in Progress”.
3. To end the emergency call, press the End Call softkey or press the Speaker button.
Avaya one-X
™
Deskphone SIP for 9608/9611G IP Telephone User Guide September 2010 35
To Next Page
Loading...
