Chapter 2: SNMP Configuration
28 Installing and Configuring the Avaya S8400 Media Server February 2006
Setting selected traps (alarming)
The default is to set all traps, which can result in large log entries. However, only a few traps
need to be set. See the User Guide that comes with the SNMP module for the menus and
commands for setting these traps.
Set the following traps:
● UPS on Battery—Indicates AC fail with pending shutdown based on battery reserve
available
● UPS in Bypass—Failure either Failed UPS or overload
● Replace battery—Failure of periodic (28-day) battery test indicating battery needs to be
replaced.
To Next Page
Loading...
