Configuring Telnet for Windows 2000/XP
Installing and Configuring the Avaya S8400 Media Server February 2006
31
Configuring Telnet for Windows 2000/XP
You can set the Microsoft Telnet application to send a carriage return (CR) and line feed (LF)
whenever you press Enter. The installation program sees this as 2 key presses. If you are
running Windows 2000/XP, correct this before you copy the Remaster Program to the SDD.
To configure telnet for Windows 2000/XP:
1. Click Start > Run to open the Run dialog box.
2. Type telnet and press Enter to open a Microsoft Telnet session.
3. Type display and press Enter to see the current settings.
● Close the dialog box if the Line feed mode - Causes return key to send CR appears.
● Continue if New line mode - Causes return key to send CR & LF appears.
4. Type unset crlf and press Enter.
5. Type display and press Enter to verify that Line feed mode - Causes return key to
send CR appears.
6. Close the dialog box.
To Next Page
Loading...
