Avaya S8400 - UPS Leds

Chapter 8: Installation verification
68 Installing and Configuring the Avaya S8400 Media Server February 2006
UPS LEDs
The UPS LEDs flash briefly after the UPS is plugged in. The Normal mode LED flashes after a
self-test, indicating that the UPS is in Standby mode.
For more information, see the UPS user’s guide that comes with the Powerware UPS.
Figure 6: LEDs on Powerware 9125 UPS
Figure notes:
1. Normal mode indicator
2. Battery mode indicator
3. Bypass mode indicator
4. Test/Alarm reset button
5. Off button
6. On button
7. Bar graph indicators
8. Alarm indicators
1
2
3
4 5
6
7
8
ledlups KLC 030102