Avaya S8700 Series User Manual

Overview
Issue 2.1 June 2006 1035
Conversions
Overview
This section contains modules that describe conversion procedures for Linux-based systems.
This section covers the following conversion paths:
● Chapter 7: Converting PNs to IP-PNC on page 1041
- Converting some or all direct-connect port networks to IP-connect
on page 1047
- Converting some or all CSS port networks to IP-PNC
on page 1079
- Converting some or all ATM port networks to IP-PNC
on page 1115
● Chapter 8: Converting the Media Server Mode on page 1147
- Converting S8300 ICC mode to LSP mode
on page 1157
- Converting S8300 LSP mode to ICC mode
on page 1149
- Installing or converting to an S8500 LSP
on page 1165
- Converting IP-PNC port networks with simplex control to duplicated control
on page 1181
- Converting simplex bearer to duplicated bearer on IP-PNC port networks (with
S8700-series Media Servers only) on page 1201
- Converting software duplication link to a DAL1 link on an S8720 Media Server
on
page 1223
Note:
Note: For information on the following mode conversions, see the Avaya Enterprise
Survivable Server (ESS) User Guide (03-300428)
- S8500 Main to ESS
- S8500 MBS to ESS
- S8700 MBS to ESS
- S8700 Main to ESS
- S8700 ESS to Main

Avaya S8700 Series Specifications

General

Form Factor	Rack-mountable
Model	S8700 Series
Type	Server
Processor	Intel Pentium III or later
Operating System	Avaya Communication Manager
Network Interfaces	Ethernet
Power Supply	Redundant power supplies available