Avaya S8700 Series User Manual

Migration paths
Issue 2.1 June 2006 707
Presite migration checklist
Before you go on site, complete the following tasks:
Before you go on site, complete the following additional tasks:
9
Task Description
Verify the voice network,
dial plan, and E911 for
remote locations were
redesigned.
(if applicable)
Verify that all existing circuit
packs work with the new
system.
Check the Minimum Vintage Table. Go to the
Hardware and Software Compatibility Matrix (ftp//
ftp.avaya.com/incoming/Up1cku9/tsoweb/media/
minhardwarevintages.pdf).
Replace any TN799B/C
C-LAN circuit packs.
Replace with the TN799DP circuit pack.
Replace 259A adapter and
CAT3 cable.
Replace with the cable extender adapter (Comcode
848525887) and CAT5 or better cable.
Replace the TN776 and
TN570 EI circuit packs.
Replace with TN570B, vintage 7 or later circuit packs.
9
Task Description
Replace the TN570 EI
circuit packs.
If coincidentally installing an ESS server, replace with
TN570D or later circuit pack.

Avaya S8700 Series Specifications

General

Form Factor	Rack-mountable
Model	S8700 Series
Type	Server
Processor	Intel Pentium III or later
Operating System	Avaya Communication Manager
Network Interfaces	Ethernet
Power Supply	Redundant power supplies available