Avaya S8700 Series - Page 79

Tasks checklist
Issue 2.1 June 2006 79
4. Install pre-upgrade service
pack, if necessary.
See "Installing the pre-upgrade
software service pack, if
necessary" in Chapter 11.
This service pack allows you to back up data so
that it can be restored to a different Linux
operating system.
5. Perform the Linux migration
backup
See "Linux migration backup (if
current release is 1.2.0
through 1.3.x)" in Chapter 11.
This backup allows you to restore translations
and system files after the hard drive has been
replaced.
6. Replace the S8300A with the
S8300B
See "Replacing the S8300A
with the S8300B Media
Server" in Chapter 11.
● Shut down the S8300A.
● Remove the S8300A from the gateway. (If
the gateway is a G700, the LED panel
must be removed together with the
S8300A.)
● Re-insert the S8300B (together with the
LED panel for a G700) into the gateway.
7. Upgrade the S8300B.
See "Upgrading the S8300B
Media Server" in Chapter 11.
● Set Telnet parameters
● Remaster hard drive and install upgrade
software
● ICC Mode: If using IA770, select yes on
Install AUDIX screen
● LSP Mode: Select No on Install AUDIX
screen.
● Verify software version
● Copy files to the S8300 (license file,
authentication file, service pack file)
8. Install post-upgrade service
pack file.
See "Installing post-upgrade
Communication Manager
service pack file from your
laptop" in Chapter 11.
Task Steps/Comments
2 of 5