Avaya S8700 - Page 4

Job Aid
4
July 2003
555-245-768, Issue 1
Comcode 700281124
7 Resolve Alarms on the Active
Media Server
Under Alarms and Notification click View Current Alarms.
Use a terminal emulator to access the Communication Manager SAT
command prompt screen. Use the display alarms command.
For instructions on resolving alarms, see Maintenance for the Avaya
S8700 Media Server with an Avaya G600 Media Gateway,
555-233-142.
Note: You cannot resolve alarms on the standby media server. Also,
DUP alarms on the active media server will re-occur. Ignore them for
now.
8 Back up All Data Sets from the
Active S8700 Media Server
Under Data Backup/Restore select Backup Now.
Note: Be sure to check the Save ACP translations prior to backup
option on the Backup Now page.
9 Suppress Alarm Origination on
the Active S8700 Media Server
Use telnet to access the Linux command line on the active media
server
. Use the almsuppress -t 120 command to suppress alarms
for the duration of the replacement process. (Maximum time is 2
hours.)
Checklist 2. Initial Tasks for Replacing a Hard Drive on an S8700 Media Server
9 Task Description