Chapter 6: IP interface configuration
62 Installing and Configuring the Avaya S8700-Series Server January 2008
Figure 6: IPSI LED display for static address
Note:
Note: Clear the ARP cache on the laptop before connecting to another IPSI. If you do
not clear the cache, the laptop appears to stop and does not connect to the next
IPSI.
9. Repeat this procedure for each IPSI circuit pack.
Programming the IPSI for DHCP addressing
!
Important:
Important: If an IPSI is in a port network that is backed up with the Enterprise Survivable
Server (ESS) option you must use static addressing for the ESS to provide
service to the port network.
Figure notes:
1. IPSI has a static IP address 2. IPSI has connectivity and an IP address
ledlip1 KLC 030502
1
2
CLK
S
E
R
V
I
C
E
N
E
T
W
O
R
K
To Next Page
Loading...
