Avaya S8730 - Enabling Alarms to INADS by Way of a Modem

Chapter 7: Postinstallation administration
72 Installing and Configuring the Avaya S8700-Series Server January 2008
2. Select the switch you want to administer and click Submit.
3. Locate the ports that you want to disable and select Disable in that row.
4. Click Submit Changes.
Enabling alarms to INADS by way of a modem
Note:
Note: Enable alarms on both servers.
1. Start an SSH session on the server.
2. Type almenable -d b and press Enter
.