Avaya T3 - Page 61

61
Customising your telephone
Changing general settings
Exit menu. The new setting has been saved.
Switch on call waiting
Press the "Menu" function key.
Scroll to the Settings menu item.
Confirm your selection.
Scroll to the Dial settings menu item.
Confirm your selection.
Scroll to the Call waiting menu item. An indication on the right hand side of
the window shows whether the function is on or off.
Change setting. The new status is displayed.
Exit menu. The new setting has been saved.
i
Note
• If you are making a call and have switched off call waiting, a caller will receive the
busy signal.
Account code
Each outgoing call can be assigned an account code. This enables the call to be
assigned to a project or client number.
Press the "Menu" function key.
Scroll to the Settings menu item.
Confirm your selection.
Scroll to the Dial settings menu item.
Confirm your selection.
Scroll to the Account code menu item. If already set up, the current accounting
number is displayed.
Confirm your selection.
Change or re-enter the account code.
Confirm the account code. The new account code has been saved.
i
Note
• The accounting code can have between 1 and 15 digits.