T7208 Digital Deskphone layout
This section describes the location and function of the buttons and
other features on the face of the T7208 Digital Deskphone.
T7208 layout
A Telephone light Flashes for incoming
calls. Lights up when
Message Waiting
Indication (MWI) is
supported by system
software. Contact your
system administrator for
more information.
B Adjustable display Shows time and date,
call, and feature
information. The display
can be tilted up and down
to personal preference.
C Release button Ends an active call or
feature.
D Dial pad Used to dial out and
access features.
E Volume control Adjusts ringer and
handset volume.
F Mute button Turns the microphone off
or on when you are on a
call.
G Headset button Turns the headset mode
on.
H Feature button Starts or ends a feature.
I Hold button Places the active call on
hold.
J Memory and line buttons Used to store frequently
used telephone numbers
to the phone memory.
K ▲ Indicators Appear next to active line
and memory buttons.
L Feature card plate Storage compartment for
you feature card.
M Number card Write your extension
number on this card.
Telephone Setup
Use the following tasks to set up the T7208 Digital Deskphone.
Adjusting the contrast level
Use the following task to adjust the contrast level of the LCD display.
1. Press Feature * 7.
2. Press 1 through 9 to select the contrast level. The higher the
number, the higher the contrast level.
Changing the ring type
Use the following task to change the ring type on the telephone.
1. Press Feature * 6.
2. Press 1 through 4 to select the ring type. A preview tone is
played.
3. Press Feature to store the ring type.
Programming memory buttons
Memory buttons are buttons with ▲ indicators not assigned as line,
intercom or handsfree buttons. Memory buttons store internal and
external numbers or features to give you one touch dialing or feature
activation. Avaya IP Office supports duplicate programming. For
example, you can program a single feature or number to multiple
memory buttons.
Note:
You can use the Desktop Assistant application to customize button
label strips for your telephone. Go to support.avaya.com to
download the Desktop Assistant application.
Programming an external autodial number
You can program a memory button with a new number or feature.
1. Press Feature * 1.
2. Press the memory button you want to save the number to.
3. Dial the external number you want to save to the memory button.
4. Press Hold to store the number to the telephone memory.
T7208 Digital Deskphone for
IP Office Quick Reference
Guide
To Next Page
Need help?
General
