5. Label the memory button with a button label strip.
Programming an internal autodial number
You can program an internal autodial number to a memory button.
1. Press Feature * 2.
2. Press the memory button you want to store the number to.
3. Dial the extension you want to save to the memory button. If a
valid extension is entered, it is saved automatically to the
memory button.
4. Label the memory button with a button label strip.
Programming a feature code — method 1
You can program a feature code to a memory button.
Feature IP Office
Standard
Version
IP Office Quick Version/
PARTNER Version/Norstar
Version
Personal
Speed Dial
Feature 0,
*00 to *99
#80 to #99 (also Feature *4,
80 to 99).
System
Speed Dial
Feature 0,
001 to 999
Feature 0, 600 to 699
Ring Again
(Set/Clear)
Feature 2 /
Feature #2
AutCB works on phones with
soft keys.
Conference Feature 3 Feature 3
Forward All
On/Off
Feature 4 /
Feature #4
Feature 4 / Feature #4
Last Number
Redial
Feature 5 Feature 5
Page Feature 60 Prefix * to the extension/
group number.
Retrieve
Messages
Feature 65
or Feature
981
777 (own mailbox) or 778
(mailbox select)
Dial Voice
Call
Feature 66 Prefix * to the extension/
group number.
Priority Call Feature 69 Not supported
Transfer Feature 70 Feature 70
Call Park Feature 74 Transfer call to own
extension number.
Call Unpark Feature #74
<park slot
ID>
6<extension number
(whoever parked the call)>
Call Pickup
Group
Feature 75
66<pickup group number>
Direct Call
Pickup
Feature 76 6<extension number>
Do Not
Disturb On/
Off
Feature 85 /
Feature #85
Feature 85 / Feature #85
Group Listen
On/Off
Feature
802 /
Feature
#802
Not supported
Feature IP Office
Standard
Version
IP Office Quick Version/
PARTNER Version/Norstar
Version
Call Log Feature 812 Feature 812
Button
Inspect
Feature *0 Use button programming.
Speed Dial
Button
Feature *1 Use button programming:
Auto Dial — Other
Internal Auto
Dial
Feature *2 Use button programming:
Auto Dial — Intercom
Button
Programmin
g
Feature *3 Feature *3
Store a
Personal
Speed Dial
Feature *4 Feature *3, Feature *480 to
*499.
Ringer
Sound
Feature *6 System Admin function only
Contrast Feature *7 Feature *7
Ring Volume Feature *80 Feature *80
Enbloc
Dialing On/
Off
Feature *82 Not supported Hot dial only.
1. Press Feature * 3.
2. If prompted for a security code, enter your Hotdesking Login
password.
3. Press the memory button you want to save the feature to.
4. Press Feature and enter the feature code. The feature is stored
to the memory button.
5. Label the memory button with a button label strip.
Programming a feature code — method 2
You can program a feature code to a memory button.
1. Press Feature * 3.
2. If prompted for a security code, enter your Hot Desking Login
password.
3. Scroll (using the “>>>” softkey or Volume Up/Down) through the
features list to find the feature you want to save to a button
4. Press Selct or HOLD at the feature you want to program.
5. Press the memory button you want to save the feature to.
6. If prompted with the existing programming on this button, press
Repla or HOLD to program the button. Press Back or dial-pad
‘0’ to cancel without saving the programming, and return to the
selected feature.
7. Repeat steps 3 through 6 for each additional button you want to
program. Press Rls when finished.
8. Label the programmed button with a button label strip.
Resetting memory buttons to default feature code
programming
You can return all programmed feature buttons on your phone to the
default feature programming for your phone model.
1. Press Feature * 3.
2. If prompted for a security code, enter your Hot Desking Login
password.
3. Press ** .
T7208 Digital Deskphone for
IP Office Quick Reference
Guide
To Next Page
Loading...
