Do you have a question about the Avdel 07530 and is the answer not in the manual?
Brand | Avdel |
---|---|
Model | 07530 |
Category | Power Tool |
Language | English |
Essential safety rules for tool operation, installation, and servicing.
Additional safety precautions and warnings to be observed during tool use.
Describes the pneumatic tool's capabilities and compatible fastener types.
Provides dimensional diagrams and details for the 07530 and 07532 models.
Details air supply specifications, recommended setup, and connections.
Guides on correct cursor fitting and orientation for fastener feeding.
Step-by-step instructions for loading and reloading fasteners into the tool.
Instructions on how to operate the tool correctly and safely.
Identifies and shows the correct orientation for mandrels and follower springs.
Describes different nose jaw types and criteria for selecting the appropriate one.
Detailed tables for selecting imperial nose jaws based on fastener type.
Detailed tables for selecting metric nose jaws based on fastener type.
Guide for selecting mandrels and follower springs for Chobert/Grovit fasteners.
Mandrel and follower spring selection for Briv fasteners (Imperial units).
Mandrel and follower spring selection for Briv fasteners (Metric units).
Mandrel selection for Avlug, ASERT, and Avtronic fasteners.
Outlines essential daily and weekly inspection and maintenance tasks.
Details the recommended service kit and general tool maintenance procedures.
Instructions for dismantling tail jaw cylinder and hydraulic piston.
Maintenance procedures for valve assemblies, handle, and cursor.
Step-by-step guide for dismantling the intensifier assembly.
Lists the components and part numbers for the intensifier assembly.
Instructions for pilot valve maintenance and its component parts list.
Information on the recommended priming oil and associated safety data.
Step-by-step guide for priming the tool after assembly or use.
Identifies common tool faults, their causes, and recommended remedies.