- 30 -
OPERATING DESCRIPTION
Refer to page 21 (code AF997) of the present manual for the operating description
DESCRIPTION OF THE FRONT PANEL AND INDICATIONS (Fig. 1)
Note: The alarm indication LEDs are always OFF when the control panel is ON.
The fast flashing indication prevails over the slow flashing mode.
Mechanical key
Timer
microswitches
Jp1 jumper
P1
Zone exclusion
pushbutton
LED
ON OFF
FLASHING FLASHING
Function Colour
fast slow
Mains Green Mains present Mains absent
On Green Control panel ON Control panel OFF Under testing
Tamper Red Tamper open Tamper closed Tamper alarm stored
Zone A1 Red Zone A1 open Zone A1 closed Zone A1 excluded Zone A1 alarm stored
Zone A2 Red Zone A2 open Zone A2 closed Zone A2 excluded Zone A2 alarm stored
Zone A3 Red Zone A3 open Zone A3 closed Zone A3 excluded Zone A3 alarm stored
Zone B1 Red Zone B1 open Zone B1 closed Zone B1 excluded Zone B1 alarm stored
Zone B2 Red Zone B2 open Zone B2 closed Zone B2 excluded Zone B2 alarm stored
Zone C1 Red Zone C1 open Zone C1 closed Zone C1 excluded Zone C1 alarm stored
Zone C2 Red Zone C2 open Zone C2 closed Zone C2 excluded Zone C2 alarm stored
To Next Page
Loading...
