Need help?Do you have a question about the AVE AF921 and is the answer not in the manual?
General| Brand | AVE |
|---|---|
| Model | AF921 |
| Category | Control Panel |
| Language | English |
Detailed technical specifications of the control panel and its features.
Information regarding the device's compliance with relevant directives and standards.
Details on the control panel's internal power supply unit, voltage, and current capacity.
Options for configuring the system's protection modes, such as traditional or pre-alarm.
Procedures for arming, disarming, and partially activating the alarm system.
Procedure for remotely updating telephone numbers via SMS messages.
Information on connecting the system to professional security monitoring services.
How the system logs and stores past events for review and troubleshooting.
Utilizing the system's clock to schedule and control connected electrical loads.
Performing functional tests on the control panel and its detectors.
Verifying the functionality of the telephone dialler's transmission capabilities.
Explanation of the key functions and their meaning during the programming phase.
A visual guide to navigating the system's programming menus and options.
Setting up delays and identification labels for wired input connections.
Programming the AF978R keypad for system control and user code management.
Procedure to exclude specific sensors from active system monitoring.
Configuration options for the TC1 and TC2 relays, including timing modes.
Setting up DTMF commands to control radio receivers and system functions.
Enabling and configuring notifications for power interruptions and restoration.
Setting up periodic system status calls for monitoring.
Configuring notifications for the expiry of the SIM card within the system.
Setting the input type (NO/NC) for the wired IN1 to IN6 connections.
Adjusting the system's internal clock and date settings.
Configuring parameters for interfacing with external telephone exchanges.
Changing the primary user access code for the alarm system.
Changing the installer access code for system configuration and maintenance.
Enabling the antiscanner function to detect and report radio jamming.
Configuring the supervision function for monitoring peripheral device status.
Setting the duration for the exit delay period after system activation.
Restoring the system's configurations to their default factory settings.
Step-by-step instructions for safely replacing the control panel's internal battery.
To Next Page
