SYSTEM ARCHITECTURE AND COMPONENTS
POWER SUPPLY UNIT
The power supply unit inside the control panel supplies a 13Vdc voltage and a 850mA current. The following table
is supplied to facilitate the calculation of the system s total current consumption for its operation in the event of a
power failure:
Coe Description Consumption (mA) Quantity Total consumption (mA)
AF921RF
Control panel 55 1 55 +
AF45 60
Flush-mounted PIR detector 0,1
..+
AF45 62
Flush-mounted PIR detector 7
..+
AF963
Wall-mounted DT detector 25
..+
AF960
Wall-mounted PIR detector 0,1
..+
AF962
Wall-mounted PIR detector 7
..+
..+
Max. value: 270mA
Note: To ensure that the system will operate for 24h in the event of a power failure, the maximum current
consumption of 270mA (with 12V 6,5Ah batteries) should not be exceeded.
To Next Page
Loading...
