aventon Aventure - Front Wheel and Fender Installation; Install Front Wheel

10
Step4: Front wheel installation.
A. Take out front wheel B. Remove fork protective cover and take
remove black protective guard. out plastic insert from front wheel brake caliper.
Rubber Cover
Black Protective Guard
Plastic Insert
C. Loosen the front axle nuts and place the front
suspension fork onto the front Wheel. Ensure the
brake rotor is between the brake pads of the
brake caliper.
D. Use 15mm open wrench to tighten front axle
nut, recommended torque value at 25-30Nm.