AVer CAM520 Pro2 - Page 13

5
“
” for 1 second to turn on or
off the WDR function.

Press and hold the number button
“
” for 1 second to turn on or off
the SmartFrame function.

Press and hold the number button
“
” for 1 second to enable or
disable RTMP streaming function.

Press and hold the number button
“
” for 1 second to force camera
to enter sleep mode. It will cut all
the video streaming off. To wake it
up, press the button for 1 second
again or press direction button. It’s
not workable while USB streaming
is on.
8. Brightness -
Decrease the brightness.
9. Call/Answer
Answer a call or start a call.
10. Enter
To confirm selection. Not supported for
CAM520 Pro2.
11. Mute/Un-mute
Speakerphone
Mute/Un-mute the speakerphone. Not
supported for CAM520 Pro2.
12. Volume Up/Down
Adjust volume up or down. Not
supported for CAM520 Pro2.
13. Preset Hot Key
Press to move the camera to the
preset position the user has set.
14. Brightness +
Increase the brightness.
15. Hang Up
End the call.