AVer MT300 - Select Group; Group Management Features

15
Select Group
The Select group menu includes:
 Device status: Click the question mark icon
for reference.
Camera is sending data to MT300
Device online
Device offline
Incorrect account or password
 Group +: Add a camera and microphone
group.
 Toggle switch: Enable or disable a group.
 MIC indicator:
 Green
Online
 Gray
Offline
 Hamburger menu: Hover over a group to
display the hamburger menu. Click the menu to
set presets, edit a group, delete a group or set
a group overlay priority.
 Group overlay priority: Select Group
overlap priority on the hamburger menu to set
a priority. To cancel, deselect. The star icon
indicates a priority group.
This can be used when groups are sharing a
camera. When these microphones receive the
same sound source, the camera moves to the
preset defined in the priority group.
Set a preset
 Set preset: If you haven’t defined
presets for your camera, click Set
preset on the hamburger menu to add
presets. Refer to the steps in <Set a
Preset> in Manual Mode.