AVer MT300 - NDI Integration; NDI Settings Configuration

25
NDI
Network Device Interface (NDI) is a protocol that transmits high-quality, low-latency video and audio
streams over IP networks.
Tracking box comes in two models: MT300 (without NDI) and MT300N (with NDI). To purchase
NDI|HX upgrade, please visit NewTek Online Store
(https://store.newtek.com/ndi-hx-upgrade-for-cameras.html#).
Select the Settings icon on the main page > NDI.
Item
Description
Local Device Name
Enter a name that identifies your camera group on the NDI
software.
Device Channel (Device ID)
Enter a name that identifies your camera on the NDI software.
 The default is MT300 or MT300N.
 Use no more than 10 characters, upper and lowercase letters,
numbers and punctuation marks (! @ % ^ , . / : + ? [ ] { } - _ ~).
Receive Group
Enter a name for a receive group.
 All devices in the receive group receive the same NDI streams.
 The receive group should remain public. If this is changed,
you will need to join the group through NDI® Access Manager.
Reliable UDP
Select the checkbox to enable Reliable User Datagram Protocol
(RUDP).
Discovery Server
Select the checkbox to enable discovery server to allow devices to
discover and connect to each other on a network automatically.
Discovery Server Address
Enter the IP address of a server running a discovery server
application.